Triple M Services

Drilling & Anchor Equipment

*** Now Shipping to All of North America ***

Inventory

 

Augers and Drilling - AUGER & ANCHOR DRIVES

 



 

 
 

Belltec Auger Drives

Model: NC Series

Compact planetary auger drive for light to moderate drilling conditions. Mounts available for skid steer loaders, mini skid steers and tractor front end loaders. Flow ranges from 6-30 GPM and operating pressures to 3500 PSI. Ideal for Farm and Ranch and occasional construction purposes.
Bits, mounts and hoses are sold seperately

 

 
 

Belltec Auger Drives

Model: H Series

Heavy duty planetary auger drive for the toughest drilling conditions. Mounts available for skid steers, tractor front end loaders, backhoes and excavators. Flow ranges from 10-35 GPM and operating pressures to 3500 PSI. No case drains required. Ideal for light Construction, rental and heavy farm and ranch purposes.

 

 
 

Belltec Auger Drives

Model: M Series

Planetary auger drive for moderate to heavy duty drilling conditions. Mounts available for skid steers, tractor front end loaders, backhoes and excavators. Flow ranges from 10-35 GPM and operating pressures to 3500 PSI. No Case drain hoses required. Ideal for light Construction, rental and heavy farm and ranch purposes.

 

 
 

DIGGA Anchor Drives

Model: HH-6K Hand Held Anchor Drive

Features: Compact high torque Digga manufactured gearbox. Lightweight - just 90lbs for ease of movement. The perfect drive for confined spaces. High efficiency Eaton/Digga geroler hydraulic motor. Motor mounted pressure relief valve fitted standard. Not suitable for machine mounting.

 

 
 

DIGGA Auger Drives

Model: 3DSS for Skid Steers

Designed for Skid Steer Loaders 2.5 ton to 3.8 ton (10-30 GPM)

Features:

Compact Digga manufactured gearbox

Digga designed Eaton motor

2 Piece shaft design ensures maximum side load ratings without
increasing load on bearings

Lifetime shaft pull out warranty

5 year gear box and 3 year motor warranty

2 in. Hex output shaft
Max Torque @ 3500 psi = 3300 ft-lbs
Max Pressure 3500 psi @ 16 GPM
Max Flow 30 GPM @ 1800 psi
Max HP = 34 hp

 

 
 

Belltec Auger/Anchor Drives

Model: HTLS6K

MAX 6000 FT. LBS OF TORQUE. FLOW RANGES FROM 6-15 GPM AND UP TO 3500 PSI. NO CASE DRAIN REQUIRED. IDEAL FOR ALL DRILLING AND SOME SCREW ANCHOR PURPOSES. 2 IN. HEX OUTPUT SHAFT.

 

 
 

Belltec Auger/Anchor Drives

Model: HTLS10K

MAX 10,000 FT. LBS OF TORQUE. FLOW RANGES FROM 15-30 GPM AND UP TO 4000 PSI. NO CASE DRAIN REQUIRED. IDEAL FOR ALL DRILLING AND SOME SCREW ANCHOR PURPOSES. 2-1/2 IN. HEX OUTPUT SHAFT.

 

 
 

DIGGA Auger Drives

Model: Single Speed Auger Drive

Digga single speed auger drives are available to suit the following machines:

- Mini-loader 0.85 to 1 ton
- Skid Steer 1 to 3.8 ton
- High Flow Skid Steer
- Mini Excavator 0.75 to 5 ton
- Truck Crane/Telehandler
- Excavator/Backhoe 4.5 to 8 ton
- Excavator 9 to 30 ton

Features:

- Compact Digga manufactured gearbox
- Digga designed Eaton motor
- 2 Piece shaft design
- Lifetime shaft pull out warranty
- 5 year gear box and 3 year motor warranty
- Easily converted to a screw anchor drive with the addition of an 'anti kickback valve'

DIGGA AUGER DRIVES ARE TYPICALLY AVAILABLE ONE WEEK AFTER PLACING YOUR ORDER WITH TRIPLE M SERVICES. CONTACT US TO FIND OUT WHICH DIGGA DRIVE WILL MEET YOUR NEEDS.

 

 
 

DIGGA Auger Drives

Model: Two Speed Auger Drive

Digga two speed auger drives are available to suit the following machines:

- High Flow Skid Steer
- Mini Excavator 0.75 to 5 ton
- Truck Crane/Telehandler
- Excavator/Backhoe 4.5 to 8 ton
- Excavator 9 to 30 ton

Features:

- Compact high torque Digga manufactured gearbox
- Fitted with Eaton VIS motor
- Integrated PRV (Pressure Relief Valve)
- Extreme duty shaft locking system
- Low maintenance with 5yr gear box and 3yr motor warranty
- Like having two drives in one. High speed for small diameter holes and low speed for high torque/rock drilling.

Digga Auger Drives are typically available one week after placing your order with Triple M Services. Contact us to find out which Digga drive will meet your needs.

 

 
 

DIGGA Anchor Drives

Model: Single Speed Anchor Drive

Designed in conjunction with leading screw anchor / pile installers around the world. Digga Single Speed Anchor Drives range in torque values from 5000 - 30,000 ft. lbs depending on the drive.

Features:

- High efficiency EATON/DIGGA bell geroler hydraulic motors with integrated Pressure Relief Valve, ensures max volumetric effeciency for consistent & efficient pile installation
- ECV (Energy Control Valve) to prevent rapid decompression
of oil, caused by the reverse energy created by pile kick-back
- Engineered hood & ears for maximum strength
- Extreme duty shaft retaining system
- No Case Drain required
- 3yr Gearbox & 2yr Motor Warranty (when fitted with an ECV Valve)
- Available in two pressure series: ADS for machines with 3500 psi and ALS for machines with 3000 psi.

DIGGA AUGER DRIVES ARE TYPICALLY AVAILABLE ONE WEEK AFTER PLACING YOUR ORDER WITH TRIPLE M SERVICES. CONTACT US TO FIND OUT WHICH DIGGA DRIVE WILL MEET YOUR NEEDS.

 

 
 

DIGGA Anchor Drives

Model: Two Speed Anchor Drive

Developed in conjunction with leading screw anchor / helical pile installers around the world. DIGGA SINGLE SPEED ANCHOR DRIVES RANGE IN TORQUE VALUES FROM 5000 - 360,000 FT. LBS DEPENDING ON THE DRIVE.

Features:

- 2 Speed drive system
- Compact high torque Digga manufactured gearbox
- Change speeds with just the flick of a switch

DIGGA AUGER DRIVES ARE TYPICALLY AVAILABLE ONE WEEK AFTER PLACING YOUR ORDER WITH TRIPLE M SERVICES. CONTACT US TO FIND OUT WHICH DIGGA DRIVE WILL MEET YOUR NEEDS.

 

 
 

DIGGA Anchor Drives

Model: MM-10K Mini Machine Anchor Drive

FEATURES:

- DESIGNED FOR STAND ON MACHINES WITH ROC 600 LBS MINIMUM OR MINI EXCAVATORS UP TO 3.5 TONS
- ACTUAL TORQUE 8,000 FT-LBS @ 3000 PSI
- 150 LBS TOTAL WITH MINI MACHINE MOUNT, 172 LBS TOTAL WITH MINI EXCAVATOR MOUNT
- MOUNT AVAILABLE FOR FULL SIZE SKID STEERS
- CAN BE SUPPLIED WITH HOOD FOR TORQ PIN COMPATIBILITY
- 2.5 IN. SHORT HEX OUTPUT SHAFT
- 1 YEAR WARRANTY

 

 
 

Auger Torque

Model: Earth Drills

Auger Torque Earth Drills are high-quality and innovative attachments for the general construction and landscaping industries. Available for Truck Cranes, Mini Excavators, Mini Skid Steers, Backhoes, Excavators, Full Size Skid Steers & Telehandlers.

Applications include drilling for rural or commercial use; from post holes to helical pile installation.

Please call for more information.

 

 
 

DIGGA Auger Drive

Model: 30DDS

30,000 LB Auger Drive Unit. Can be mounted to excavators 15-30 Ton.