Triple M Services

Drilling & Anchor Equipment

*** Shipping to All of North America ***

Check out our Specials Page

 

 

ANCHOR DRIVES

 



 

 
 

DIGGA Anchor Drives

Model: HH-6K Hand Held Anchor Drive

Features: Compact high torque Digga manufactured gearbox. Lightweight - just 90lbs for ease of movement. The perfect drive for confined spaces. High efficiency Eaton/Digga geroler hydraulic motor. Motor mounted pressure relief valve fitted standard. Not suitable for machine mounting.

 

 
 

Belltec Auger/Anchor Drives

Model: HTLS6K

MAX 6000 FT. LBS OF TORQUE. FLOW RANGES FROM 6-15 GPM AND UP TO 3500 PSI. NO CASE DRAIN REQUIRED. IDEAL FOR ALL DRILLING AND SOME SCREW ANCHOR PURPOSES. 2 IN. HEX OUTPUT SHAFT.

 

 
 

Belltec Auger/Anchor Drives

Model: HTLS10K

MAX 10,000 FT. LBS OF TORQUE. FLOW RANGES FROM 15-30 GPM AND UP TO 4000 PSI. NO CASE DRAIN REQUIRED. IDEAL FOR ALL DRILLING AND SOME SCREW ANCHOR PURPOSES. 2-1/2 IN. HEX OUTPUT SHAFT.

 

 
 

DIGGA Anchor Drives

Model: Single Speed Anchor Drive

Designed in conjunction with leading screw anchor / pile installers around the world. Digga Single Speed Anchor Drives range in torque values from 5000 - 30,000 ft. lbs depending on the drive.

Features:

- High efficiency EATON/DIGGA bell geroler hydraulic motors with integrated Pressure Relief Valve, ensures max volumetric effeciency for consistent & efficient pile installation
- ECV (Energy Control Valve) to prevent rapid decompression
of oil, caused by the reverse energy created by pile kick-back
- Engineered hood & ears for maximum strength
- Extreme duty shaft retaining system
- No Case Drain required
- 3yr Gearbox & 2yr Motor Warranty (when fitted with an ECV Valve)
- Available in two pressure series: ADS for machines with 3500 psi and ALS for machines with 3000 psi.

DIGGA AUGER DRIVES ARE TYPICALLY AVAILABLE ONE WEEK AFTER PLACING YOUR ORDER WITH TRIPLE M SERVICES. CONTACT US TO FIND OUT WHICH DIGGA DRIVE WILL MEET YOUR NEEDS.

 

 
 

DIGGA Anchor Drives

Model: Two Speed Anchor Drive

Developed in conjunction with leading screw anchor / helical pile installers around the world. DIGGA SINGLE SPEED ANCHOR DRIVES RANGE IN TORQUE VALUES FROM 5000 - 360,000 FT. LBS DEPENDING ON THE DRIVE.

Features:

- 2 Speed drive system
- Compact high torque Digga manufactured gearbox
- Change speeds with just the flick of a switch

DIGGA AUGER DRIVES ARE TYPICALLY AVAILABLE ONE WEEK AFTER PLACING YOUR ORDER WITH TRIPLE M SERVICES. CONTACT US TO FIND OUT WHICH DIGGA DRIVE WILL MEET YOUR NEEDS.

 

 
 

DIGGA Anchor Drives

Model: MM-10K Mini Machine Anchor Drive

FEATURES:

- DESIGNED FOR STAND ON MACHINES WITH ROC 600 LBS MINIMUM OR MINI EXCAVATORS UP TO 3.5 TONS
- ACTUAL TORQUE 8,000 FT-LBS @ 3000 PSI
- 150 LBS TOTAL WITH MINI MACHINE MOUNT, 172 LBS TOTAL WITH MINI EXCAVATOR MOUNT
- MOUNT AVAILABLE FOR FULL SIZE SKID STEERS
- CAN BE SUPPLIED WITH HOOD FOR TORQ PIN COMPATIBILITY
- 2.5 IN. SHORT HEX OUTPUT SHAFT
- 1 YEAR WARRANTY